U1 Foldable Electric Bike 350W

Step 1:
Keep the bike turned on.

Step 2:
Simultaneously press the "+" and "-" buttons to enter the P settings page.

Step 3:
Press the "M" button to switch to P05.

Step 4:
Press the "+" or "-" button to change the speed limit to 32km/h.

Click here to download the U1 E-bike Manual

● Find the flip lever and flip up the seat
● Push and spin the key to the unlocked position
● Pull out the battery carefully and lift it from the bike frame

Note: To re-install the battery, align the slots on the bottom of the battery and reinsert the
battery into the frame. Turn the key to the locked position. If you want to know the battery
level without turning on the computer, press the button on the top of the battery to display
the current battery level.

Press and hold the "M" button for 3 seconds to turn the e-bike on or off.

The specifications listed in our product manuals may sometimes differ from the actual product due to customs regulations and transportation policies in different regions. To ensure compliance and smooth delivery, certain specifications may be adjusted accordingly.

For the most up-to-date and accurate product details, please refer to the specifications listed on our official website. If you have any questions, feel free to contact our support team.

Several factors can affect the speed and performance of an electric scooter:

· Rider weight: A higher rider weight may affect the scooter's maximum speed.
· Terrain and slopes: Riding on hilly or uneven terrain may reduce performance compared to a flat road.
· Battery charge: A low battery may cause the scooter to limit speed or power to save energy.

Settings or riding mode: Check if your scooter is in a specific mode (e.g. Eco mode) that limits maximum speed and power. Switching to Sport mode or a more powerful setting may help.

If your scooter is still under warranty and you suspect a defect, we can arrange for further inspection and, if necessary, a replacement.

There can be a number of reasons why your brakes are not working properly. Here are some common reasons and possible solutions:

· Brake failure or brake retardation:
Loose or worn brake cables can affect brake performance. Please check that the brake cables are properly adjusted and tightened.
Worn or damaged brake pads can also be the cause. In this case, they should be replaced.

· Loud brake noises:
Dirt or deposits on the brake pads or brake discs can cause noises. A thorough cleaning helps ensure smooth operation.
If the brake pads are badly worn or damaged, they should be replaced to eliminate the noise.

· Damaged brake pads or brake discs:
If you find obvious damage to the brake pads or brake discs, such as deformation or severe wear, they need to be replaced.
Please check your brake system for any of the above problems. If you are not sure, please send us a video or picture of your brake system so that we can help you further.

If the problem persists or cannot be solved by yourself, please let us know. We will take the necessary measures to repair or replace the defective part.

Press and hold the "+" button for 3 seconds to turn the front and rear lights on or off. (The rear lights switch to flashing mode when you apply the brakes).

Battery life is affected by a variety of factors. We'd like to help you figure this out. Here are some tips to extend your battery life:

· Avoid overcharging (over 100%) or completely discharging to 0%.
· When not in use, store the e-scooter and battery in a cool, dry place and avoid extreme temperatures.

It is normal for the battery's performance to degrade over time if used regularly and over long distances.

After turning on the bike, press the plus (+) and minus (-) buttons simultaneously to access the settings menu.
Press the "M" button to toggle between the following settings: P01, P02, P03, and P04.
You can use the plus (+) or minus (-) buttons to change the corresponding setting.

P01: Unit system (00000 = Metric, 00001 = Imperial)
P02: Cruise control (00000 = Off, 00001 = On)
P03: Backlight (00001 = Low, 00002 = Medium, 00003 = High)
P04: Reset odometer (00000 = Total mileage zeroed or reset, 00001 = Odometer resettable)

🚚Fast & Free Delivery
Our multiple warehouse locations offer free shipping to the United Kingdom. Orders will be delivered within 1-3 business days.

💝Return & Refund Guarantee
Our warranty policy covers all orders for up to 12 months after sales, and the 30-day return and refund policy allows you to buy with peace of mind.

📞Lifetime Technical Support
Our professional service continues long after your purchase. Feel free to contact iScooter‘s technical support team at support@iscooterglobal.co.uk, or call +44 188 878 5356 / +44 808 502 0608(9AM-6AM).

If the order has not shipped, reach out to our customer service team and they will help you with order cancellation.

If the order has already shipped out, it will be treated as a return. You will need to contact iScooter Customer Service at support@iscooterglobal.co.uk to start the returns process.

We understand your return and refund request, but according to our policy, we do not support returns or refunds for accessories.

Therefore, we are unable to meet your request.

If you need an invoice, please contact our customer service at support@iscooterglobal.co.uk. Please provide the email address or address you used to place your order. After receiving your request, we will send you an invoice within 24 hours. Please also check your email inbox.

We accept Paypal, Visa, MasterCard, American Express, and Apple Pay, Klarna.